Atomos Ronin User Manual download pdf (Page 17)

Atomos Ronin – User Manual Edition 2: November 2012 15

Connect to input

As soon as you connect a supported input to the Ronin’s SDI input:

•

Rec and Mon icons will go solid and colourful

• The input format will be shown in the top left corner

• Audio inputs will show levels in bottom left corner

READY-TO-RECORD

NO INPUT / NO DISK

NO INPUT / DISK PRESENT

INPUT PRESENT / NO DISK

Before recording

• Check there is a valid signal by looking at the main screen, ensuring it

looks like the ‘ready-to-record’ screen

• Check the input signal is set to what you would like:

- Progressive with 2:2 or 3:2 pulldown or

- Interlaced

• If you see

No Input for any reason please check your camera

settings match a supported format for Ronin. See technical

speciﬁcations on page 33.

• Connect headphones and monitor the Audio channels to make sure

the sound levels are correct.

• Select the correct audio recording set from the audio menu.

• Connect any additional Analogue audio inputs and adjust gain

accordingly.

• Enter monitor mode to ensure the video is coming in as expected.

• Check you have the correct Scene & Shot number selected.

(see page 21 – Organising Material on disk)

• Check your drive is inserted and has been formatted

• Check your timecode settings are as you need

• Choose how you will start/stop your recording

• Check for clean input:

By touching the screen in Monitor mode, you can remove the

Atomos overlays to give you a clean screen. If any overlay graphics

remain, these will be coming from your camera. Please check the

settings on your camera to switch these off.

Activate pulldown removal if required

You can select the recording format by touching the top middle of the

touch screen where the format is indicated.

IMPORTANT: You need to match the format you are recording

internally on the camera with the format recorded on the Ronin.

If you are recording 24p internally on the camera you need to record

24p on the Ronin so the recordings match. To adjust the recording

format simply touch the format icon repeatedly and the Ronin will cycle

through the options available. The basic rule is match the format of

the internal recording on the camera (not the external output of the

camera). For more explanation on choosing the correct format on the

Ronin and the relationship to camera internal format and output format

refer to Section 10 – Pulldown.

8. Monitoring and Recording

The Ronin has a high-quality screen that adjusts to the scan frequency

of the incoming signal, for a smooth, accurate display.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 33 34

Comments to this Manuals

No comments

Atomos Ronin User Manual Page 17

Comments to this Manuals